Are you familiar with these terms? They may not come up in daily conversation, but in our line of work, we use them constantly. Harsh environment labeling can feel like a foreign language, and we’re here to provide answers, not leave you with questions.
Have a question about our terminology?
Check the answers on the left, and if you don’t find what you’re looking for, email us or visit our Contact Page to fill out our form.
Reverse Stain
See Bleaching
Rewind Slit
A slitting process where a roll of tape is unwound and run through a set of shear or score knives to be slit and then wound up into individual rolls.
Rewinder
A machine which takes rolls from the winder, slits or rewinds into smaller rolls. Rewinding: The operation of winding the paper from the reel on to a core to produce rolls of the desired width, diameter and tension.
Ridging
A mound-like swelling on the outer layers of a roll, lengthwise to the tape. Usually found on the more moisture-sensitive materials, such as cellophane.
Rope Stock
A smooth paper made of hemp fiber for high tensile strength.
Rubber Based Adhesive
A pressure-sensitive adhesive based on natural or synthetic rubbers.
Saturation (impregnation)
Adding materials (saturant) to the backing for improvement of physical properties and resistance to various deleterious environments. The backing of paper tapes, for instance, actually may contain as much as 50% by weight of a rubber-based impregnant.
Scanner
An electronic device used in the making of color and tone corrected color separations.
SCK
A grade of Kraft paper which has been calendered (smoothed) so that it is more dense, thinner, and more smooth than Kraft paper. Additional calendaring will result in glassine.